6
7
Cooling system
Forced air
Lubrication systems
Forced splash
Ignition system
C.D.I
PTO shaft rotation
Counterclockwise
Tune up Specifications
SERVICING YOUR ENGINE
THE IMPORTANCE OF MAINTENANCE
Good maintenance is essential for safe, economical and trouble-free operation. It will also help reduce
pollution.
WARNING
Improper maintenance, or failure to correct a problem before operation, can cause a
malfunction in which you can be seriously hurt or killed.
Always follow the inspection and maintenance recommendations and schedules in this
owner's manual.
To help you properly care for your engine, the following pages include a maintenance
schedule, routine inspection procedures, and simple maintenance procedures using
basic hand tools. Other service tasks that are more difficult, or require special tools, are
best handled by professionals and are normally performed by our technician or other
qualified mechanics.
The maintenance schedule applies to normal operating conditions.
If you operate your engine under severe conditions, such as sustained high-load or
high-temperature operation, or use in unusual wet or dusty conditions, consult your servicing
dealer for recommendations applicable to your individual needs and use.
MAINTENANCE SAFETY
Some of the most important safety precautions follow. However, we cannot warn you of every
conceivable hazard that can arise in performing maintenance. Only you can decide whether or
not you should perform a given task.
WARNING
Failure to properly follow the maintenance instructions and precautions can cause you
to be seriously hurt or killed. Always follow the procedures and precautions in this
owner's manual.
ITEM
SPECIFICATION
MAINTENANCE
Spark plug gap
0.6-0.7 mm
Refer to page 12.
Valve clearance (cold)
IN:0.06+0.02mm
EX:0.08+0.02mm
See your authorized
dealer
Other specifications
No other adjustments needed