13
15
the throttle is in the fast (or high) position.
Also verify that there is at least 2 mm clearance between the stopper and the brake cable bracket. (see
page 5)
8.Fuel tank
A.Fly wheel
B.Brake system
ENGINE ADJUSTMENTS
Do not change in any way the rated speed of the engine
(carburetor side or regulator side).
Your engine was adjusted in the factory and the non-respect of the homologation
speed engine could be dangerous for your safety and others safety. If the rated
speed is changed in any way, the factory warranty will be cancelled.
HELPFUL TIPS & SUGGESTIONS STORING YOUR
ENGINE
Storage Preparation
Proper storage preparation is essential for keeping your engine trouble free and looking
good. The following steps will help to keep rust and corrosion from impairing your
engine's function and appearance, and will make the engine easier to start when you use it
again.
Cleaning
If the engine has been running, allow it to cool for at least half an hour before cleaning. Clean
all exterior surfaces, touch up any damaged paint, and coat other areas that may rust with a
light film of oil.
Using a garden hose or pressure washing equipment can force water into the air
cleaner or muffler opening. Water in the air cleaner will soak the air filter, and water
that passes through the air filter or muffler can enter the cylinder, causing damage.
8
B
A