FAN ASSEMBLY FILTER KITS
There are three fan/filter options for the GL840N12 enclosures. Each
gives you a different CFM rating.
FFKN12-A1
Fan assembly (includes filter) & exhaust filter assembly,
230 CFM, 115V
FFKN12-A2
Fan assembly (includes filter) & exhaust filter assembly,
295 CFM, 115V
FFKN12-A3
Fan assembly (includes filter) & exhaust filter assembly,
368 CFM, 115V
Fans/filter combinations ordered with the enclosure will be installed at
the factory. Note: the fan will take up 5.75" of enclosure space behind
the face of the door. Mounting rails will have to be moved back to allow
for fan mounting and airflow. The fan will introduce air into the bottom
of the enclosure and it will leave via the top rear filter assembly. Filters
can be replaced by removing the front snap on cover of the fan and filter
assemblies.
1. Remove the gland plate from the bottom of the front door and the top
of the rear door.
13" x 13" Gland Plate
w/ (8) 1/4-20 x 3/4L
Pem Studs
12.5" x 12.5"
Gland Plate Backup
1/4-20 x 3/4"
Elastic Stop Nut
8
Summary of Contents for GL840N12-2442-SA
Page 14: ...NOTES 14...
Page 15: ...15 NOTES...
Page 16: ...FORM MS 5 02 26 REV 3 Thank you for your business ETSI Associate Member...
