2
PREFACE
This manual is provided to prevent service personnel from committing
an act that results in the risk of fire, electric shock, or injury to persons.
Only trained service personnel should receive, unpack, and assemble
a Great Lakes wall mount. In addition, only trained service personnel
should install equipment in wall mounts.
SAFETY SYMBOLS USED IN THIS MANUAL
This manual provides general safety guidelines to be observed during
installation, operation, and maintenance of the GL wall mount.
WARNING:
Failure to follow directions in the warning could result in
injury to persons or loss of life.
CAUTION:
Failure to follow directions in the caution could result in
damage to equipment or storage data.
SAFETY CONSIDERATIONS
WARNING:
Improper handling and use of the Great Lakes wall mount
could result in equipment damage, serious injury, or possible death.
Only trained service personnel should be used to remove the wall
mount from its packaging. Also, be sure you have a sufficient number
of service personnel. Do not attempt to move wall mount by yourself.
Only UL® Listed ITE (Information Technology Equipment) units should
be installed inside the Great Lakes wall mount.
Be sure to read and follow all individual manufacturer equipment
manuals for safety and installation instructions.
Proper spacing is required when installing electrical equipment
to avoid electrical shock. Maintain minimum spacing between the
accessories; components and the wall mount for safe operation of the
equipment when installed in accordance with the National Electrical
Code ANSI/NFPA 70-1999.
The ambient temperature operating range for the Great Lakes wall
mount and accessories is +50 to +95° F (+10 to +35° C).
The non-operating temperature is -4 to +140° F (-20 to +60° C).
