Expert 24 User Manual
Installation 2-2
2.2 Stand & Flexible Media Support System
2.2.1 Stand Installation
Please follow the procedures below for assembling the stand and the media support system.
Step 1
Please examine the supplied items in the accessory box of the stand carton
before you install:
Stand is an optional item for Expert 24, Item List
：
z
1 Left side vertical stand
z
1 Right side vertical stand
z
1 Support for left side
z
1 Support for right side
z
1 Stand Beam
z
2 Bottom Stands with wheels
z
2 Sliding brackets for paper take up
z
1 Hex Wrench (M5)
Φ
4
z
28 Socket flat head screws(M6*12L)
z
1 Installation Guide
Step 2
Position the Left side vertical stand perpendicularly to part
X
and put the screws into the
holes and tighten them to form a left side T-stand (Figure 2-1). Repeat the same steps with the
Right side vertical stand.
Left side vertical stand
X
Bottom Stand
Figure 2-1
