Expert 24 User Manual
Installation 2-1
2. Installation
2.1 Precaution
Please read below information carefully before you start installation.
Notice 1
z
Make sure the power switch is off before installing the cutting plotter.
z
Carefully handle the cutter to prevent any injuries.
Notice 2
Choosing a proper place before setting up the cutting plotter
Before installing your cutting plotter, select a suitable location, which meets the following
conditions.
z
The machine can be approached easily from any direction.
z
Keep enough space for the machine, accessories and supplies.
z
Keep the working area stable, avoiding severe vibration.
z
Keep the temperature between
15 and 30
℃
(60-86
o
F)
in the workshop.
z
Keep the relative humidity between
25% and 75%
in the workshop.
z
Protecting the machine from dust and strong air current.
z
Preventing the machine from direct sunlight or extremely bright lighting.
Notice 3
Connecting the Power Supply
Check the plug of the power cord to see if it mates with the wall outlet. If not, please contact
your dealer.
z
Insert the plug (male) into a grounded power outlet.
z
Insert the other end (female) of power cord into the AC connector of cutting plotter.
