26
Locking Out Marine Channels
To lock out a Marine channel during searching, press
L/O
when the scanner
stops on the channel.
To manually lock out a Marine channel, select the channel then press
L/O
.
To remove the lockout from a Marine channel, press
PSE
and or to select
channel manually, then press
L/O
until
L/O
disappears.
Locking Out Frequencies
To lock out a frequency during a one-touch service search or spectrum sweeper,
press
L/O
when the scanner stops on that frequency. The scanner locks out
the frequency then continues searching/sweeping.
Notes:
• You can lock out as many as 50 frequencies during a search (or spectrum
sweep). If you try to lock out more,
FLo -FULL
appears (see “Reviewing
Locked-Out Frequencies” and “Removing Lockouts From All Frequencies”).
• The scanner uses same Lockout List between one touch search bank and
spectrum sweeper. (ex.: the scanner uses same lock out list between air-
craft search band and aircraft spectrum sweeper band.)
Reviewing Locked-Out Frequencies
To review the frequencies you locked out, hold down
L/O/L/O RVW
for about 2
seconds during a search or spectrum sweeper. And you press or re-
peatedly.
L-r
(Lockout Review) appears and the scanner displays all locked out
frequencies as you press or , or,
EMPty
appears when the search bank
has no locked out frequencies. When you reach the highest locked-out fre-
quency, the scanner beeps twice and returns to the lowest locked-out frequency.
Removing Lockouts Form All Frequencies in a One-Touch
Service Search Bank
Note:
These steps do not clear any lockouts in the marine bank.
1. Hold down
L/O/L/O RVW
for about 2 seconds during a desired search band.
L-r
appears.
2. While holding down
TUNE/CLEAR
, press
L/O
to clear the lockout.
FLo ALL-
CL
appears about 2 seconds. After 2 seconds,
YES —Ent and No —CLEAr
appears alternately.
3. Press
ENT
.
L-r EMPty
appears. The scanner clears any lockouts from all
frequencies in a one touch bank. Or, if you do not want to clear the lockouts,
press
TUNE/CLEAR
.
