19
3. Press
ENT
to store the frequency. The channel and frequency flash twice. If
you want to cancel the operation, press
TUNE/CLEAR
instead of
ENT
.
Note:
If you entered a frequency that is already stored in another channel,
-dUPL-
(duplicate) and the lowest numbered channel containing the duplicate
frequency flash for about 3 seconds. If you want to store the frequency any-
way, press
ENT
again. You can then delete the frequency later. See “Clearing a
Stored Channel” on Page 21.
If there is no empty channel in the bank,
Ch-FULL
appears after you press
ENT
. To store more frequencies, you must clear some channels or you may
program the other bank. See “Clearing a Stored Channel” on Page 21. To con-
tinue searching after
Ch-FULL
appears, press
TUNE/CLEAR
.
Using Tune
During a tune, the scanner tunes up or down, starting from a frequency you
specify. Follow these steps to use tune.
Note:
You can use the scanner’s delay feature while using tune.
1. Press
TUNE
.
PSE
and start frequency appears.
2. If desired you can change the start frequency. To change the start frequency,
enter frequency with numeral keys, then press
ENT
.
3. Press
PSE
to start tune.
-t-
appears on the display.
4. To change the tuning direction, press or .
The scanner displays or and start tune.
Note:
To pause the tune, press
PSE
. To resume tune, press
PSE
again.
5. To tune for another active frequency, press or .
Once you find interesting frequencies during the tune, you can store them into
the scanner’s channel-storage banks.
1. To store the displayed frequency in the desired bank’s lowest vacant chan-
nel, press
ENT
when you find a frequency. The bank number and
StorE
appears.
2. If you desired to store the other bank, press number key.
3. Press
ENT
to store the frequency. The channel and frequency flash twice. If
you want to cancel the operation, press
TUNE/CLEAR
instead of
ENT
.
Note:
If the scanner displays
-dUPL-
, the entered frequency is already stored
in another channel. See above Note on this page.
If there is no empty channel in the bank,
Ch-FULL
appears after you press
ENT
. To store more frequencies, you must clear some channels or you may
program the other bank.
