![background image](http://html1.mh-extra.com/html/gravograph/ls100-energy/ls100-energy_operating-and-maintenance-manual_2258788054.webp)
54
M_LS100IQ EX Energy_EN_C
Using the machine
4.
Transferring the file
1. Check that the USB cable is correctly connected at both ends.
2. Check that the machine screen says "Ready to receive".
3. Click on: Print.. (graphics software).
Or Click on the icon:
,Click on:
(Gravostyle/Laserstyle).
The file is sent to the machine. The transferred bytes appear on the machine's screen until the transfer is
complete, which is confirmed by an audible signal.
Once the file is downloaded, the machine display updates automatically. The screen displays the file name
and certain parameters.
5. Positioning the object to be engraved
To load and position the keyring on the engraving table inside the machine:
1. Open the upper door
2. Position the keyring in the top left corner of the table, against the scaled rules.
6. Focusing
Check that the table is low enough for the moving head not to touch the keyring.
Automatic focus adjustment (automatic Z Ref.): Using autofocus, the focal height is adjusted automatically.
Autofocus
Press the key.
Or Enable autofocus in the driver.
Autofocus is performed automatically at each engraving launch. Disable autofocus when engraving a set of
plates of the same thickness. To save time, autofocus is only performed on the first plate.