CPT20 USER MANUAL
11
G value) or less than 9.78031 (Equator G value)
※
G value cannot be entered when the G value is set not accessible for standard
calibration and SW1 calibration switch is at CAL_OFF position
※
Factory default 9.79423
Function Setup
Press the T key and the 4 key in weighing mode to start Functions Setup
UF1 Backlight
UF2 RS232 Communication
UF3 RS232 Baud rate
UF1. Backlight :
0 Backlight OFF
1 Auto-Backlight (Default Auto-Backlight)
Press 0 ~ 1 keys to select condition. Press the > key to go to the next
function setup. Press the ENTER key to save the change and return back to
weighing mode. Press the ESC to abort setup and back to weighing mode
UF2: RS232 :
0 OFF
1 Stable Output
2 Stream Output
3 Accumulation Output (keyboard output) (Default OFF)
Press 0 ~ 6 keys to select condition. Press the > key to go to the next
function setup. Press the ENTER key to save the change and return back to
weighing mode. Press the ESC to abort setup and back to weighing mode
Note: 4 ~ 6 can connect LP50 printer.
U F 1
B L i t
1
U F 2
r S 2 3 2
0
Summary of Contents for CPT20
Page 15: ...CPT20 USER MANUAL 15 ...
