manualshive.com logo in svg

Gravely 994132, Operator'S Manual

Share
Download
Gravely 994132 Operator'S Manual Download Page 40

EN - 38

SHORT-TERM STORAGE

IMPORTANT: 

NEVER wash unit with high 

pressure water or store outdoors.

1. Allow unit to cool and clean with mild 

soap and water.

2. Tighten all hardware to correct 

specifications.

3. Inspect unit for visible signs of wear or 

damage. Repair as needed.

4. Prepare fuel system for storage.

NOTICE: 

Gravely recommends using a 

quality fuel stabilizer in all fuel. Gasoline left 
in the fuel system without a stabilizer, even 
for short periods of time, deteriorates and 
leaves gummy deposits in the system that 
may damage the carburetor and fuel hoses, 
filter and tank. For the best effectiveness, add 
stabilizer to all fuel containers whenever 
purchasing fuel. Add the stabilizer to the 
container before adding fuel.

a. Add Gravely fuel stabilizer (see 

Service Parts

 on page 21) or 

equivalent according to 
manufacturer's instructions to the fuel 
tank and any fuel containers with 
remaining fuel.

b. Operate engine outdoors for at least 

5 minutes to allow stabilizer to reach 
the carburetor.

5. Close fuel valve and allow engine to stop 

on its own.

6. Turn key to off position and remove from 

ignition.

7. Store unit in a cool, dry, protected area. 

DO NOT store unit outdoors.

LONG-TERM STORAGE

1. Perform short-term storage procedures.
2. Lubricate as directed in 

Maintenance 

Schedule

 on page 20.

3. Touch-up all scratched painted surfaces.

4. Remove and charge battery as directed 

in 

Charge Battery

 on page 25. Store 

battery in a cool, dry, protected area.

5. Store unit in a cool, dry, protected area. 

Do not store unit outdoors.

START-OF-SEASON 
PREPARATION

1. Before adding fuel for the first time after 

long-term storage, add fresh, stabilizer-
treated fuel to fuel tank and any fuel 
containers with remaining fuel.

2. Charge and install the battery. 

STORAGE

WARNING: 

AVOID INJURY. 

Read and understand entire 

Safety 

section before 

proceeding.

ACCESSORIES

See your authorized Gravely dealer to add 
these optional accessories to your unit.

Description

Part No.

Mulching Kit – 48" 
(Model 994132)

79105700

Mulching Kit – 52" 
(Models 994133, 134)

79105800

Mulching Kit – 60" 
(Models 994137, 143)

79402000

Kit, LPG Pro-Stance 
(Models 994132, 133, 137)

78806310

Kit, Pro-Stance OCDB

79218200

Kit, Grass Catcher

78804300

Summary of Contents for 994132

















































Reviews:

No comments

Brands by name

Popular brands

Load more brands