Gravely 992210, Owner'S/Operator'S Manual

Page: 22 / 44

GB - 22
Gravely Dealers will provide any service which
may be required to keep your unit operating at
peak efficiency. Should engine service be
required, it can be obtained from a Gravely
Dealer or the engine manufacturer’s
authorized service center.
SERVICE POSITION
(Figure 8)
IMPORTANT: Place unit on a flat level
surface. ALWAYS shut off engine, set parking
brake, and remove ignition key. Ensure unit is
secure and will not tip over. When a lift is
used, strap and clamp unit to the lift.
1. Place steering levers in neutral position
and engage parking brake.
2. Tip seat forward (see Seat Adjustments
on page 15).
3. Unlatch the hood latches.
4. Using the hood frame handle, slowly lift
the hood up until the hood cable is taunt
and is supporting the weight of the hood.
LUBRICATING UNIT
IMPORTANT: Wipe front axle grease zerk
and two front axle castor pivots clean before
and after lubrication.
NOTE: Use Ariens Hi-Temp Grease or
equivalent (part number 00036700).
SERVICING THE BATTERY
NOTE: Unit comes equipped with a
maintenance-free battery that requires no
regular maintenance except cleaning the
terminals.
SERVICE AND ADJUSTMENTS
WARNING: AVOID INJURY. Read
and understand entire Safety
section before proceeding.
CAUTION: HOT SURFACES may
result in injury. DO NOT touch
engine or drive parts which are
hot from operation. Allow parts to
cool before servicing.
1. Hood
2. Hood Cable
3. Hood Frame
Handle
4. Hood Latches
5. Steering Levers
Figure 8
2
1
3
4
5
Service Position
Item Lubrication Location Interval
1 Repack Front Axle Caster
Pivot 400
hours
2 Grease Front Axle Grease
Zerk 50
hours
Oil All Pivot Points and
Pin Connections 50
hours
Figure 9
WARNING: AVOID INJURY. Read
and understand the entire Safety
section before proceeding.
WARNING: Battery posts,
terminals and related accessories
contain lead and lead compounds,
chemicals known to the State of
California to cause cancer and
reproductive harm. Wash hands
after handling.
1
2
1