EN - 23
3. Return seat to operating position and
slide seat back and forth to spread
grease along tracks.
CHECK MOWER BLADES
Check blades for wear and damage. Replace
or sharpen as needed.
CHECK BATTERY
Clean Battery
1. Disconnect battery cables, negative cable
first.
2. Clean terminals and battery cable ends
with a wire brush.
3. Coat terminals with dielectric grease or
petroleum jelly.
4. Reinstall battery cables, positive first.
CHECK MOWER BELTS
Check belts for wear and replace as needed.
CHECK HYDRAULIC SYSTEM
Check Hydraulic Oil Level
1. Place unit in service position. See
Service Position
on page 21.
2. Check oil level in expansion tanks. Oil
should reach the cold fill indicator mark.
See Figure 28.
IMPORTANT:
Engine should be cold when
checking initial oil level.
CAUTION:
AVOID INJURY. Use
sturdy gloves or padding to
protect hands when working with
mower blades.
Rotation of one blade rotates the
other blades.
CAUTION:
Unbalanced blades
cause excessive vibration and
eventual damage to unit.
Balance blades before
reinstalling on unit.
NEVER weld or straighten
blades.
WARNING:
Battery posts,
terminals and related
accessories contain lead. Wash
hands after handling.
Figure 27
CAUTION:
AVOID DAMAGE.
DO NOT allow tools to contact
metal surfaces when removing
positive battery cable.
CAUTION:
Keep body parts
away from idler when
releasing idler spring tension.
Figure 28
1. Cold Fill Line
1
Summary of Contents for 991240
Page 41: ......
Page 42: ...PRINTED 655 West Ryan Street Brillion WI 54110 www gravely com...
