EN - 19
POSITION ROPS
IMPORTANT:
Inspect ROPS and seatbelt for
damage and loose or missing hardware.
Raise Center Bar
1. Remove hairpins from lock pins and
remove lock pins from hinge plate.
2. Raise center bar and secure with lock
pins and hairpins.
Lower Center Bar
1. Remove hairpins from lock pins and
remove lock pins from hinge plate.
2. Lower center bar and secure with lock
pins and hairpins.
IMPORTANT:
Return center bar to the raised
position when clear of obstacles.
ADJUST SEAT
Set Seat Height
Rotate seat height adjustment dial on front of
seat to match the approximate weight of the
operator.
Set Seat Position
1. While seated, pull seat adjustment lever
inward and slide seat forward or
backward to desired position.
2. Release lever and slide seat slightly
forward or backward to lock position.
WARNING:
AVOID INJURY.
Seatbelt MUST be worn when
operating with center bar raised.
WARNING:
AVOID INJURY.
Lower the center bar only when
needed to drive under an object.
There is no rollover protection
with the center bar in the
lowered position. DO NOT wear
seatbelt when ROPS is in
lowered position.
Figure 18
WARNING:
AVOID INJURY.
Make all seat adjustments with
the unit stopped, parking brake
engaged and engine off.
Figure 19
Lowered Position With
Bagger Installed
Lowered Position With
No Bagger Installed
