EN - 20
Set Lumbar Support
• Lift lever to increase lumbar support.
• Lower lever to decrease lumbar support.
Set Backrest Angle
Rotate dial on left side of seat to adjust
backrest angle.
Set Armrest Angle
Turn angle adjustment knob clockwise to
raise the front of armrest or counterclockwise
to lower front of armrest.
SET CUTTING HEIGHT
See Figure 22.
1. Push mower lift pedal forward until
transport lock engages.
2. Insert adjustment pin through desired
setting in height-of-cut adjustment
system.
3. Push mower lift pedal slightly forward,
release transport lock and slowly release
mower lift pedal until it contacts
adjustment pin and stops.
OPEN FUEL VALVE
See Figure 23.
• Turn fuel valve toward the left or right fuel
tank to use fuel from that tank.
• Move valve to the off position when storing
or transporting unit.
Figure 20
1. Seat Height Adjustment Dial
2. Seat Adjustment Lever
3. Lumbar Support Lever
Figure 21
1. Backrest Angle Dial
2. Armrest Angle Adjustment Knob
Figure 22
Figure 23
Right
Tank
Left
Tank
Off
