Gravely 991082 ZT HD48 Owner'S/Operator'S Manual Download Page 3

GB - 3

• Record Unit Model and Serial numbers 
here.

• Record Engine Model and Serial numbers 
here.

PRODUCT REGISTRATION

The Gravely dealer must register the product 
at the time of purchase. Registering the 
product will help the company process 
warranty claims or contact you with the latest 
service information. All claims meeting 
requirements during the limited warranty 
period will be honored, whether or not the 
product registration card is returned. Keep a 
proof of purchase if you do not register your 
unit. 

Customer Note:

 If the Dealer does not 

register your product, please fill out, sign and 
return the product registration card to Gravely 
or go to www.gravely.com on the Internet.

UNAUTHORIZED REPLACEMENT 
PARTS

Use only Gravely replacement parts. The 
replacement of any part on this equipment 
with anything other than a Gravely authorized 
replacement part may adversely affect the 
performance, durability, and safety of this unit 
and may void the warranty. Gravely disclaims 
liability for any claims or damages, whether 
regarding warranty, property damage, 
personal injury or death arising out of the use 
of unauthorized replacement parts. 

NOTE: 

To locate your nearest Gravely 

Dealer, go to www.gravely.com.

DISCLAIMER

Gravely reserves the right to discontinue, 
change, and improve its products at any time 
without public notice or obligation to the 
purchaser. The descriptions and 
specifications contained in this manual were 
in effect at printing. Equipment described 
within this manual may be optional. Some 
illustrations may not be applicable to your 
unit.

DEALER DELIVERY

Dealer should:

1. Test brakes after unit is assembled to be 

sure adjustment has not been disturbed 
in shipment (See 

Parking Brake 

Interlock System 

on page 14). Wheel 

brakes are properly adjusted at factory. 

2. Check the safety interlock system to 

make sure that it is functioning properly. 
With operator on seat, unit must not start 
unless steering levers are in neutral (N) 
and Power Takeoff (PTO) is disengaged 
(Off). Engine must stop if operator 
leaves seat when steering levers are in 
any drive position or PTO is engaged 
(On). See 

Safety Interlock System 

on 

page 14.

3. Fill out Original Purchaser Registration 

Card and return the card to Gravely.

4. Explain Limited Warranty Policy.
5. Explain recommended lubrication and 

maintenance. Advise customer on 
adjustments. Instruct customer on 
controls and operation of unit. Discuss 
and emphasize the Safety Precautions. 
Give customer Owner/Operator, Parts, 
and Engine Manuals. Advise customer 
to thoroughly read and understand them.

Customer Note:

 Your Dealer has been 

provided complete set-up and preparation 
instructions which must be completed prior to 
you taking delivery of this unit. The dealer is 
required to review important information in 
this manual with you before or upon delivery 
of the unit or attachment.

Figure 1

Serial Number Label

Summary of Contents for 991082 ZT HD48









































Reviews: