GB - 43
ELECTRICAL SERVICE
Replacing Fuses
IMPORTANT:
Avoid damage! When
replacing fuses – use only 20-amp fuses or
you may damage the circuit.
The unit is equipped with one 20-amp fuse to
protect the charging circuit. The fuse is
located under the control panel area to the
left of the relays.
1. Remove defective fuse from socket.
2. Check metal clip in fuse window and
discard fuse if clip is broken.
3. Install new fuse into socket.
Replacing Relays
(988154, 55, 57, 58, 59)
NOTE:
Relays are interchangeable. Use only
The unit is equipped with four relays located
under the control panel area.
1. Remove defective relay from socket.
2. Install new relay into socket.
Figure 48
20A fuse
988153, 56
Figure 49
1. 20-Amp Fuse
2. Clutch Relay
3. Ignition Kill Relay
4. Start Relay
5. Safety Relay
988154, 55
Figure 50
1. 20-Amp Fuse
2. Clutch Relay
3. Ignition Kill Relay
4. Start Relay
5. Safety Relay
988157, 58, 59
