5- 8
33006_jh_V1
Commissioning
Start your PC and check if at least one of the supported simu-
lators is installed. (If you want to use a different simulator than
the suggested ones, you have to check which software is com-
patible. Check then all the controls)
Plug the USB connector of the controller to a free USB port of your PC.
Switch the
Sim-Control 6
on by the On/Off switch.
Launch the already installed simulator in your PC and follow the soft-
ware instructions.
Description of the transmitter control functions
33006.M1 - Mode 1
1 Rotary potentiometer
2. Elevator trim
3. Elevator/rudder stick
4. Rudder trim
5. Switch
6. Status LED
7. On/Off switch
8. Aileron trim
9. Throttle/aileron stick
10. Throttle trim
11. 2 way switch
12. USB connection cable
1
2
3
4
5
7
8
9
10
11
6
12
