After connecting the balance board, the charger can check the number
of cells. If the reported number of cells is not correct, tap the ESC button
to return to the previous page and re-run the parameters check again.
Repeat this process until the number of cells is correct. With the correct
parameters, the next page will be accessed automatically.
Without the balance board connection, the number of cells should be
entered manually.
Tapping the
Enter button will cause the charger to
immediately initiate the charging process.
(This page does not appear for connec tions
with NiCd, NiMH batteries.)
59
BATTERY CELL CHECK
This page (left) demonstrates the battery check process after
the balancer is connected. The next page is accessed automatically.
Tapping the Enter
button will immediately cause
the charger to initiate the charge process.
NUMBER OF CELLS CHECK