background image

www.modellmarkt24.ch;   www.modellmarkt24.de

Introduction

Thank you very much for purchasing the 

Graupner

 

mz-4 HoTT 

transmitter

.

Read this manual carefully to achieve the best results with your 
transmitter and first of all to safely control your models. If you 
experience any trouble during operation, take the instructions to 
help or ask your dealer or 

Graupner

 Service Centre.

Due to technical changes, the information may be changed in 
this manual without prior notice. Keep updated by regularly 
checking our own website, 

www.graupner.de

 to be always 

updated with the products and firmware.

This product complies with national and European legal require-
ments.

To maintain this condition and to ensure safe operation, you must 
read and follow this user manual and the safety notes before using 
the product!

 

 NOTE

This manual is part of that product. It contains important information 
concerning operation and handling. Keep these instructions for future 
reference and give it to third person in case you gave the product.

Service Centre

Graupner Central Service

Graupner/SJ GmbH

Henriettenstraße 96

D-73230 Kirchheim/Teck

   

Servicehotline

   

 (+49) (0)7021/722-130

   Monday - Thursday:

   9:15 am - 4:00 pm

   Friday:

   9:15 am - 1:00 pm

   

 [email protected]

Graupner USA
3941 Park Dr Suite 20-571
El Dorado Hills, CA 95762

Website: www.graupnerusa.com
Phone: +1 855-572-4746
Email:[email protected]

Graupner 

in Internet

 

 

For the service centers outside Germany please refer to our web 
site 

www.graupner.de

www.modellmarkt24.ch;   www.modellmarkt24.de

Summary of Contents for mz-4

















Reviews: