
8 / 48
S1024.mz32_V1.7_sh_en
Safety notes
!
These safety ins
ƚƌƵĐƟŽŶƐ
are intended not only to protect the prod-
uct, but also for your own and other people’s safety. Therefore please
r
ĞĂĚƚŚŝƐƐĞĐƟŽŶ
very carefully before using the product!
ͻ
Do not leave the packaging material lying around, this could be
a dangerous toy for children.
ͻ
Persons, including children, with reduced physical, sensory or
mental capab
ŝůŝƟĞƐ͕
or lack of experience or knowledge, or not
capable to use safely the transmi
Ʃ
er must not use the trans-
mi
Ʃ
er without supervision or ins
ƚƌƵĐƟŽŶ
by a responsible per-
son.
ͻ
Opera
ƟŽŶ
and use of radio-controlled models needs to be
learnt! If you have never operated a model of this type before,
start carefully and make yourself familiar with the model's
r
ĞĂĐƟŽŶƐ
to the remote control commands. Proceed always
responsibly.
ͻ
Protect all equipment from dust, dirt, moisture. All equipment
must be protected from vibra
ƟŽŶ
as well as excessive heat or
cold. The models may only be operated remotely in normal
outside temperatures such as from -10°C to +55°C.
ͻ
First, always perform a range and
ĨƵŶĐƟŽŶ
test on the ground
before you start using your model. Only so you can grant a safe
use!
ͻ
Always use all your HoTT components only with the latest
Įƌ
mware version.
ͻ
If you have ques
ƟŽŶƐ
which cannot be answered by the oper-
a
ƟŶŐ
manual, please contact us or another expert in the
ĮĞůĚ͘
For your safety by handling the transmi
Ʃ
er
!
WARNING
ͻ
Also while programming the transmi
Ʃ
er, make sure that a
motor connected in the model cannot accidentally start. Dis-
connect the fuel supply or drive ba
Ʃ
ery beforehand.
ͻ
Never program your transmi
Ʃ
er while normally using the
model. This can result in both ina
Ʃ
en
ƟŽŶ
when controlling
and incorrect programming.
!
CAUTION
Avoid every kind of short-circuit in all sockets of the transmi
Ʃ
er
and of the receiver! Risk of
Į
re! Use only the suitable connectors.
In no case the electronic component of the transmi
Ʃ
er or of the
receiver may be changed or
ŵŽĚŝĮĞĚ͘
Any interference will void
the warranty.
Summary of Contents for mz-32 HoTT
