GRAUPNER Kingpad mc-edition mc-16 Manual Download Page 5

5 / 16

3974.2_MP_V1

Introduction

Thank you very much for purchasing the 

Graupner

 

Kingpad mc-edi-

tion

. This is extremely versatile. This manual is valid for all the modu-

les listed on the cover sheet.
Read this manual carefully to achieve the best results with your 

King-

pad mc-edition

 and first of all to safely control your models. If you 

experience any trouble during operation, take the instructions to 

help or ask your dealer or 

Graupner

 Service Centre.

Due to technical changes, the information may be changed in this 

manual without prior notice. Be always updated by checking perio-

dically on our website, 

www.graupner.de

 to be always uptodate with 

the products and firmwares.
This product complies with national and European legal require-

ments.

To maintain this condition and to ensure safe operation, you must 

read and follow this user manual and the safety notes before using 

the product!

 

 Note

This manual is part of that product. It contains important informa-

tion concerning operation and handling. Keep these instructions for 

future reference and give it to third person in case you gave the pro-

duct.

Service centre

Graupner Central Service

Graupner GmbH
Henriettenstraße 96
D-73230 Kirchheim / Teck

   

Servicehotline

   

 (+49) (0)7021/722-130

   Monday - Thursday:
   9:15 am -4:00 pm
   Friday:
   9:15 am - 1:00 pm
   

 [email protected]

Graupner 

in Internet

 

  For the service centers outside Germany please refer to our web site 

www.graupner.de

Summary of Contents for Kingpad mc-edition mc-16

















Reviews: