background image

8 / 16

3974.32_MP_V1 

Symbol description

Always observe the information indicated by this warning sign. Par-

ticularly those which are additionally marked with the words 

CAU

-

TION

 or 

WARNING

. The signal word 

WARNING

 indicates the 

potential for serious injury, the signal word 

CAUTION 

indicates pos-

sibility of lighter injuries.
The signal word 

Note

 indicates potential malfunctions.

Attention

 indicates potential damages to objects.

Safety notes

General

These safety instructions are intended not only to protect your own 

and other people’s safety, but also to protect the product. Therefore 

please read this section very carefully before using the product!.

 



Do not leave the packaging material lying around, this could be 
a dangerous toy for children.

 



Persons, including children, with reduced physical, sensory or 
mental capabilities, or lack of experience or knowledge, or not 
capable to use safely the transmitter must not use the transmit-
ter without supervision or instruction by a responsible person.

 



Operation and use of radio-controlled models needs to be learnt! 
If you have never driven such a model, then start extra carefully 
and make sure to be familiar with the reactions of the model to 
the remote control commands. Proceed always responsibly. This 
also means that you have for your own protection liability 
insurance.

 



Protect all equipment from dust, dirt, moisture. All equipment 
must be protected from vibration as well as excessive heat or 
cold. The models may only be operated remotely in normal out-
side temperatures such as from -10°C to +55°C.

!

!

Summary of Contents for Kingpad mc-32 Edition

















Reviews: