GRAUPNER HoTT mz-8P Manual Download Page 23

23 / 24

S1032_mz-8P_V1.1sh

Notes on environmental protection

If this symbol is on the product, instructions for use or packaging, it 

indicates that the product may not be disposed with normal house-

hold waste once it has reached the end of its service life.  It must be 

turned over to a recycling collection point for electric and electronic 

apparatus. 
Individual markings indicate which materials can be recycled. You 

make an important contribution to protection of the environment by 

utilizing facilities for reuse, material recycling or other means of 

exploiting obsolete equipment. 
Batteries must be removed from the unit and disposed of separately 

at an appropriate collection point. Please inquire if necessary from 

the local authority for the appropriate disposal site.

Care and maintenance

The product does not need any maintenance. Always protect it 

against dust, dirt and moisture. 
Clean the product only with a dry cloth (do not use detergent!) lightly 

rub.

Warranty conditions

Graupner/SJ

 GmbH, Henriettenstrassee 96, 73230 Kirchheim/Teck 

grants from the date of purchase of this product for a period of 24 

months. The warranty applies only to the material or operational 

defects already existing when you purchased the item. Damage due 

to misuse, wear, overloading, incorrect accessories or improper han-

dling are excluded from the guarantee. The legal rights and claims 

are not affected by this guarantee. Please check exactly defects 

before a claim or send the product, because we have to ask you to 

pay shipping costs if the item is free from defects.
These operating instruction are exclusively for information purposes 

and are subject to change without prior notification. The current 

version can be found on the Internet at 

www.graupner.de 

on the 

relevant product page. In addition, the company 

Graupner/SJ

 has 

no responsibility or liability for any errors or inaccuracies that may 

appear in construction or operation manuals. 
Not liable for printing errors.

P

Summary of Contents for HoTT mz-8P

























Reviews: