GRAUPNER GmbH & Co. KG D-73230 KIRCHHEIM/TECK GERMANY
Änderungen vorbehalten! Keine Haftung für Druckfehler 12/2007
51
We recommend that you set the following exponential values at the transmitter:
Ailerons
30%
Elevators
30%
Rudder
30%
Important:
When fitting and adjusting the various linkages you should ensure that they move
freely, without binding, are able to move to their full extent - including trim travel - and
are not obstructed mechanically at any point.
When you move the rudder stick to the right, the rudder should also deflect to the
right (left stick: left rudder). Pull the elevator stick back towards you, and both
elevators must deflect up (stick forward: elevators down).
If you move the aileron stick to the right, the right aileron should rise, the left aileron
fall. When you move the throttle stick forward, the motor should run to the full-throttle
position, i.e. the carburettor barrel should be fully open.
We wish you every success and many enjoyable flights with your EXTRA 300 HP.
Yours - the
Graupner
team
