GRAUPNER BERNHARD GRUBEN 2027, Assembly Instructions Manual

Page: 61 / 89

GRAUPNER GmbH & Co. KG D-73230 KIRCHHEIM/TECK GERMANY
No liability for printing errors. Technnical modifications reserved. #0060384 04/2009
61
56 Roller 2 ABS Tube, 4 / 2 Ø x 22 mm
57 Roller outer ring 4 ABS Tube, 5 / 4 Ø x 6 mm
58 Retaining screw 8 Stainless st. Pan-head, 2.2 Ø x 9.5 mm
59 Side guide roller bracket 14 ABS 1 mm, laser-cut
60 Roller pivot 2 Nylon Tube, 1.9 Ø x 33 mm
61 Roller axle 2 Steel Wire, 0.8 Ø x 33 mm
62 Roller 2 ABS Tube, 4 / 2 Ø x 29 mm
63 Stern flap 1 ABS Vac.-moulded
64 Side wall reinforcement 2 ABS 1 mm, laser-cut
65 Inner bulkhead framework 18 ABS 1 mm, laser-cut
66 Swivel pushrod connector 2 Metal Ready made
67 Hinge tube 4 ABS Tube, 3.2 / 2.1 Ø x 6 mm
68 Cover 2 ABS 1 mm, laser-cut
69 Stern fairing 1 ABS 1 mm, laser-cut
70 Centre hinge 6 ABS 1 mm, laser-cut
71 Centre hinge tube 1 ABS Tube, 3.2 / 2.1 Ø x 24 mm
72 Outer hinge tube 2 ABS Tube, 3.2 / 2.1 Ø x 20 mm
73 Centre hinge pin 1 Nylon Tube, 1.9 / 0.9 Ø x 50 mm
74 Outer hinge pin 2 Nylon Tube, 1.9 / 0.9 Ø x 40 mm
75 Guide tube 2 ABS Tube, 3.2 / 2.1 Ø x 60 mm
76 Snake sleeve 2 Nylon Tube, 1.9 / 0.9 Ø x 200 mm
77 Servo output lever extension 2 Plywood 2 mm, laser-cut
78 Retaining screw 4 Stainless st. Pan-head, 2.2 x 9.5 mm
79 Swivel pushrod connector 2 Metal Ready made
80 Stern flap servo 2 Various Order No. 4101.LOSE
81 Guide roller bracket 6 ABS 1 mm, laser-cut, one pair higher
82 Roller pivot 3 Nylon Tube, 1.9 Ø x 25 mm
83 Roller axle 3 Steel Wire, 0.8 Ø x 25 mm
84 Roller 3 ABS Tube, 4 / 2 Ø x 22 mm
85 Roller, outer ring 6 ABS Tube, 5 / 4 Ø x 6 mm
86 Lower guide roller bracket 4 ABS 1 mm, laser-cut
87 Lower roller pivot 2 Nylon Tube, 1.9 Ø x 28 mm
88 Lower roller axle 2 Steel Wire, 0.8 Ø x 28 mm
89 Lower inner roller 2 ABS Tube, 4 / 2 Ø x 25 mm
90 Lower outer roller 2 ABS Tube, 5 / 4 Ø x 25 mm
91 Centre guide roller bracket 4 ABS 1 mm, laser-cut
92 Centre roller pivot 2 Nylon Tube, 1.9 Ø x 50 mm
93 Centre roller axle 2 Steel Rod, 0.8 Ø x 50 mm
94 Centre inner roller 2 ABS Tube, 4 / 2 Ø x 47 mm
95 Centre outer roller 2 ABS Tube, 5 / 4 Ø x 18 mm
96 Upper guide roller bracket 4 ABS 1 mm, laser-cut
97 Upper roller pivot 2 Nylon Tube, 1.9 Ø x 58 mm
98 Upper roller axle 2 Steel Wire, 0.8 Ø x 58 mm
99 Upper inner roller 2 ABS Tube, 4 / 2 Ø x 55 mm
100 Upper outer roller 2 ABS Tube, 5 / 4 Ø x 55 mm
101 Stern flap bar 1 ABS Round rod, 5 Ø x 130 mm
102 Side roller bracket 10 ABS 1 mm, laser-cut
103 Roller bracket brace 6 ABS 1 mm, laser-cut
104 Side guide roller bracket 4 ABS 1 mm, laser-cut
105 Side roller pivot 2 Nylon Tube, 1.9 Ø x 52 mm
106 Side roller axle 2 Steel Wire, 0.8 Ø x 52 mm
107 Side inner roller 2 ABS Tube, 4 / 2 Ø x 47 mm
108 Side outer roller 2 ABS Tube, 5 / 4 Ø x 47 mm
109 Bulwark inner wall 2 ABS 1 mm, laser-cut
110 Bulwark reinforcement 2 ABS 1 mm, laser-cut
111 Bulwark stanchion 4 ABS 1 mm, laser-cut
112 Bulwark inner strut 2 ABS 1 mm, laser-cut
113 Bulwark stanchion base 4 ABS 1 mm, laser-cut
114 Lower companionway step 2 ABS 1 mm, laser-cut