GRAUPNER GmbH & Co. KG D-73230 KIRCHHEIM/TECK GERMANY
Modifications reserved. No liability for printing errors. Ident. # 0062067 4/2010
10
Now thread the two pull-cables forward into the fuselage, so that they can be con-
nected to the double-ended servo output arm using ring-screws, nuts and clevises.
Connect an extension lead, Order No. 3935.180, to the elevator servo lead, and fit a
heat-shrink sleeve round the connector to prevent it working loose.
Thread the extension lead through the fin and allow it to fall forward into the fuselage
nose. The elevator servo can now be mounted in the plate inside the top of the fin,
using the screws supplied in the servo accessory pack.
