GRAUPNER GmbH & Co. KG D-73230 KIRCHHEIM/TECK GERMANY
Keine Haftung für Druckfehler. Technische Änderungen vorbehalten!
06/2007
18
Once you have carried out the necessary programming at the transmitter (see below),
give the LiPo battery a full charge, and the Mirage is ready for flying.
6)
Program the elevons (combined elevators / ailerons) by selecting a Delta or V-tail mixer
at the transmitter.
- Neutral elevon position:
5 mm up from the datum (0-line)
- Elevator travel ref. datum:
+ 20 mm / - 12 mm, 35% Expo
- Aileron travel ref. datum:
+ 13 mm / - 10 mm, 30% Expo
- Rudder travel, nosewheel:
+ / - 6 mm, 20% Expo
First flight:
- Assemble the model exactly as described in the instructions. Check that the radio
control system is programmed correctly (see above). Charge all the batteries. You
should now be ready for the Mirage’s first flight.
- We recommend that you carry out a range check, with and without the motor running.
-
Flying the Mirage requires that you have at least an average amount of
experience with other model aircraft.
- We recommend allowing the model to take off from the ground, ideally from an asphalt
surface. Our test models require a ground-run of 25 to 30 metres.
- The model is extremely simple to build, but it is demanding to fly.
- All of us in the Graupner team hope you have many hours of pleasure assembling and
flying your new model.
