50
Program description: reserving a new memory
sticks, whereas servos connected to sockets 5 and 6
remain steadfastly at their centre position.
If you set
up a new model helicopter, servo 6 may also respond to
some extent to the controls - depending on the position
of the throttle limiter CTRL 7. For both model types this
situation only changes once you have carried out the
appropriate assignments in the “
Transmitter control
settings
” menu.
If you wish to use a newly initialised model memory,
then this MUST fi rst be “bound” to a (further) receiver
before any servos connected to the receiver can be con-
trolled from the transmitter. For more information on this
please refer to the “Binding” section on pages 61 and 70.
You will fi nd a description of the basic steps for program-
ming a fi xed-wing model aircraft in the Programming
Examples section starting on page 144; for model
helicopters the equivalent section starts on page 166.
The following menu descriptions are arranged in the
order that they are listed in the individual menus in the
multi-function list.
33112_mx12_HoTT_2_GB.indd Abs21:50
33112_mx12_HoTT_2_GB.indd Abs21:50
06.06.2011 19:39:37
06.06.2011 19:39:37
