ð
The display turns on.
Periods for water temperature
2. Set the time for P1 ON with
and save it with
.
3. Set the time for P1 OFF with
and save it with
.
4. Repeat steps 2 and 3 for the following two periods.
ð
Three periods are programmed for regulating the water temperature.
Periods for heating circuit
5. Press
to program periods for the first heating circuit.
6. Set the time for P1 ON with
and save it with
.
7. Set the time for P1 OFF with
and save it with
.
8. Repeat steps 6 and 7 for the following two periods.
ð
Three periods are programmed for regulating the first heating circuit.
9. Press
to program periods for the second heating circuit.
10. Press
to set the desired times for the periods.
ð
Three periods are programmed for regulating the second heating circuit.
44
Summary of Contents for thermio eco C3
