GRASS Ravanson KR-2011, Manual

Page: 9 / 26

SPECIFICATION
Power voltage ~230V /50 Hz
Cooling Power 65W
Max wind 400 m3/h
Water container capacity 4 l
Net weight 4,7 kg
Size 300x320x590 mm
Ice pack 2 szt.
CONTROL PANEL
SPEED - It is used to run the device and change the
speed blowing. Airflow velocity begins to medium
power and then after 3 seconds, goes to the less
powerful, then you can use the SPEED to set the
appropriate power supply. Speed air flow is divided
into three zones: strong, average and poor.
COOL - use it when you add water or ice, the temperature drops after 20 seconds and the pilot
light is lit.
SWING - after pressing this button automatically moves the air from left to right and the pilot light
will light up.
TIMER - sets the time blowing from 0.5 to 4 hours. Pressing added 0.5 hours, a further press
cumulative total time.
ANION - after connecting to the power, press this button. Anion generator starts to build and
prepare the device to work.
WIND TYPE - after starting the device, this button is used to select the air circulation of the
"Normal wind" - a normal air, "Natural Lift" - natural air, and "Sleeping wind" - soothing air while
sleeping.
NOR - "Normal wind" (if the two indices are excluded). Constant turnover at different wind
speeds, L (low), M (medium) and H (strong)
NAT - "Natural wind" - the unit provides various wind speeds in the data series. From the weak,
through the medium to strong. The cycle lasts 90 seconds, six seconds for each wind speed and
3 seconds pause. With the key SPEED can be used all at once at speed can feel the natural
breeze with softness and comfort.
SLEEP - "Sleeping wind” - under this program, the machine controls the normal flow of air in
which the velocity decreases with the temperature change of the human body, eliminating the risk
of hypothermia during sleep. The process of regulating air flow velocity is as follows:
1. If set to air beginning at the highest speed, H This device will work in this setting for 0.5 hours
and then automatically switches to secondary mode of supply M. After a further 0.5 hours the
unit switches to the weakest mode of supply, L and will be so until it left off.
2. If set to air beginning on medium speed, M This device will operate in this mode for 0.5 hours
and automatically switches to the mode of a weak supply side L and will be so remained until the
power.
3. If we set at the beginning of the low air speed L is the device will sustain this mode until the
power.