Triton Plus - Analog Stereo Audio - User Manual
31
Control Panel Operation
Control Panel Operation
Note
This chapter is only applicable for routers with the optional local control
panel.
All local control panels are given a default configuration, which includes
the buttons
A/V Toggle
,
Panel Enable
,
Take On/Off
, and
Take
. In addition,
Input
and
Output
buttons are pre-configured.
Button Description
A/V Toggle
The
A/V Toggle
button enables/disables audio and video on a specified
address. The address can either be read from the DIP switches or be fixed.
The button toggles between three states.
Note
If the button is pressed for more than 1 second, it will go into a fourth state
where both audio and video are disabled.
In this state the button will be dimmed. If the button is pressed for more
than 1 second again, it will enable both audio and video if present. Refer to
Table 38
.
If neither audio nor video is present, it will be marked as disabled and the
toggle state will not be used.
Toggle status changes will be stored in flash and used when the panel is
powered up later.
Table 38. A/V Toggle Button
Button Color
Video Enabled
Audio Enabled
Yellow
Yes
Yes
Green
Yes
No
Red
No
Yes
Dimmed
No
No