GRASS VALLEY Profile XP PVS2000 Installation Manual Download Page 25

Page: 25 / 28

Select an RS-422 control protocol

July 21, 2000

PVS 2000 Series Installation Guide

Setting up RS-422 remote control using Prolink (Profile protocol)

Use this procedure to start and set up Prolink to control the PVS2000 using Profile
protocol.

1. Close VdrPanel if you used it earlier to test your record and play channels.

2. Open Prolink using the shortcut on the desktop or by selecting

Start | Programs |

Profile Applications | Prolink

3. Select an RS-422 serial port, then click

Select

. The Prolink window appears.

4. Test the PVS2000 system using your controller.

5. Repeat steps 2-4 for the number of control ports you need to control the PVS2000

using Profile protocol.

NOTE: For more information on the Prolink user interface see Chapter 8,
“Controlling the Profile XP Remotely” in the Profile XP System Guide.

This completes all the procedures in this Installation Guide. Refer to the Profile XP
System Guide for more information on customizing settings for your application.

Summary of Contents for Profile XP PVS2000





























Search results

Summary of Contents for Profile XP PVS2000

Reviews:

Related manuals for Profile XP PVS2000

Brands by name

Popular brands

GRASS VALLEY Profile XP PVS2000, Installation Manual

Search results

Summary of Contents for Profile XP PVS2000

Reviews:

Related manuals for Profile XP PVS2000

Brands by name

Popular brands