GRASS VALLEY NV9649, User Manual

Page: 85 / 167

75
NV9649
User’s Guide
Salvo A salvo button places the panel in salvo mode. In salvo mode, the operator
scrolls through the salvo list configured for the panel (as a panel option) to
select a salvo. When the desired salvo is selected, the operator presses a
‘Take’ button to execute the salvo. The panel then returns to normal
operating mode.
The button definition has no fields to configure.
Source The button selects a source. The source name appears in the ‘Preset’ display.
During configuration, when you assign a source button, a drop-down menu
appears: ‘Source Device’. Choose a device from the list. The ‘None’ entry is
merely a placeholder. Do not choose ‘None’.
The button definition section also presents a “level set filter” drop-down list
in which you can select a level set to reduce the number of sources through
which to browse.
The button legend is the source name, unless you check ‘Use Custom Button
Text’ and assign the button your own text.
Source
Master
Means “source is the master” and makes the source device the master.
Otherwise, the destination is the master. This button (and these concepts)
apply only to machine control routes.
The button definition has no fields to configure. Its legend is arbitrary.
The button is a toggle: Press it once to make the source the master (it goes
high-tally); press it again to make the destination the master (the button is
low-tally).
A panel option allows you to make “source is master” the default. In this case,
the button still toggles between “source is master” and “destination is
master,” and the button, if present, is high-tally by default.
The ‘Source is Master’ button is also used to initiate “broadcast” machine
control routes. See
Broadcast Routes , on page 90.
Source
Mode The button places the panel in source mode. Category selections in source
mode select source devices. Category buttons that are not source categories
become disabled in source mode.
Categories that include both source and destinations appear in both source
mode and destination mode.
The button definition has no fields to configure. Its legend is arbitrary.
Src/Dst
Mode The button toggles between source and destination modes. Category
selections in source mode select source devices. Category selections in
destination mode select destination devices.
The button definition has no fields to configure. Its legend is arbitrary.
Type Description (under NV9609 Mode)