87
Live Touch
User Guide
Using the Clip Entry Controls in the Clips Library
Use the clip entry controls on the left-hand side of the screen, below the current play clip, to
adjust the individual characteristics of your clips.
Applying the Default Speed for Slo-mo Playback
You can apply a default playback speed to slo-mo a particular clip each time it is played.
LiveTouch displays the default playback speed as a percentage in the lower two-thirds of
the
Speed
box.
To apply the default playback speed:
1 Select a clip (or several clips if they are to be set to the same playback speed).
2 Press the lower section of the
box displaying the speed percentage, for
example,
60%
.
This applies the default playback speed without opening the
Speed Settings
options.
You will see the label
SP
n
%
highlighted in the clip details for the Clip(s) assigned the
default speed setting, where
n%
is the percentage of full speed, for example,
60%
.
Setting a Constant Speed for Slo-mo Playback
You can set a different (non-default) playback speed to slo-mo a particular clip, at a steady
rate, each time it is played.
To set a constant slo-mo speed:
1 Select a clip (or several clips if they are to be set to the same speed).
2 Press
.
This opens the preset
Speed Settings
box:
Fig. 3-20: Clip Entry Controls
Toggle Loop Play of
Clip or Playlist
Toggle/Preview
Camera Angle in
Clip
Open Default Speed
Settings or Set
Speed Profile
Open & Apply Tag &
Star Ratings
Transition Settings;
Active in Playlist Controls
Select Audio Preset/
Mute Audio
Toggle Default
Playback Speed
Toggle Default
Audio Preset
Summary of Contents for LIVETOUCH
