manualshive.com logo in svg

GRASS VALLEY Kayak, User Manual, Page: 491 / 558

Share
Download
GRASS VALLEY Kayak User Manual Download Page 491

Kayak  —  User Manual

491

Configuration Menus

 

Input Index Card

Index card for input settings

Figure 399.  Sidepanel – Index Card Input

Entries belonging to the own application are marked with a green back-
ground, entries belonging to other applications are marked with a yellow 
background.

Take:

Takes the input source selected with the cursor to the 
own application.

Release:

Releases the input source selected with the cursor from 
the own application.

Show All:

In the on-state, all input sources are displayed. In the off-
state only the own (green marked) inputs are displayed.

Coupled Key:

Set all coupled keys to Default (=self) or White.

Summary of Contents for Kayak















































































































































































































































































































































































































































































































































































Reviews:

No comments