manualshive.com logo in svg

GRASS VALLEY Kayak, User Manual, Page: 279 / 558

Share
Download
GRASS VALLEY Kayak User Manual Download Page 279

Kayak  —  User Manual

279

DPM Menus

 

Stills Menu

The Stills menu allows the user to load or store stills using the delegated 
channels.

Figure 200.  RAM Recorder Stills Menu

Delegation Pane 

Select the desired channel (1 to 6) with the 

Delegation

 button. The menu 

shows the values of the selected channel.

Readout Pane 

Field1/2

 — Field 1 or field 2 is replicated to make frame and Previous 

Still/Next Still advances to the next field. This results in single-stepping in 
the field resolution.

Field1

 — Field 1 is replicated to make frame and Previous Still/Next Still 

advances to field 1 of the next still.

Field 2

 — Field 2 is replicated to make frame and Previous Still/Next Still 

advances to field 1 of the next still.

Frame

 — Fields 1 & 2 are displayed in the normal order to show frame and 

Previous Still/Next Still advances to field 1/2 of the next still.

Summary of Contents for Kayak















































































































































































































































































































































































































































































































































































Reviews:

No comments