KAM-SD-2AES-DMX Instruction Manual
15
Configuration and Adjustments
Configuration and Adjustments
KAM-SD-2AES-DMX configuration and monitoring can be performed
using a web browser GUI interface or a networked Newton Control Panel.
This section provides an overview of each of these controls along with the
configuration parameters available with each type of control device.
Configuration Summary
The configuration parameters and monitoring functions available with the
web browser interface and the Newton Control Panel are summarized in
. The parameter defaults, choices, ranges, and resolution are pro-
vided for each function
Table 3. Summary of KAM-SD-2AES-DMX Configuration Controls
Function
Default
Range/Choices
Resolution
Web Page/
Function Name
Newton
Panel
Set KAM-AES-R rear module audio output
Unbalanced
Unbalanced or Balanced
I/O Config/
Unbalanced or Balanced radio button
N/A
SDi In web page view selection
Summary
Summary or Detail
SDI In/
Summary or Detail radio button
N/A
Set error reporting for SDI input video
Enabled
Enabled or Disabled
SDI In/Detail View/
Check or uncheck error checkboxes
N/A
Demultiplex embedded audio from SDI in
No Extraction
No Extraction,
Video In.G1 to G4
DEMUX/
Str1 & Str2 column radio button
N/A
Sample rate convert demultiplexed group
Enable
Enable or Disable
DEMUX/
Disable checkbox
N/A
Report loss of audio stream
Report
Report or No Report
DEMUX/
Reporting checkbox
N/A
Select video line rate
Auto
525, 625, or Auto
Video Input Select/
Video Line Rate radio button
N/A
Frame Reference status
Report
Report or No Report
Video Input Select/
Frame Reference Report Loss of Signal
checkbox
N/A
SDI Input Error status
Warn SDI
Errors
Warn SDI Errors or
No Warning
Video Input Select/
SDI Input Errors Warn SDI Errors
Warn SDI Errors checkbox
N/A
Select output timing source
Video In
Video In or
Internal Frame Reference
Video Input Select/
Output Timing Selection radio buttons
N/A
Define VBI data lines
None
525: None, 21/284,
22/285, 23/286 or 24/287
625: None, 24/337,
25/338, 26/339 or 27/340
or 28/341
Video Input Select/
Advanced (VBI Config) radio button
VBI/Data Lines Last Data Line radio button
N/A
Main video horizontal timing adjustment
0
525: 0 to 857.5 pixels
625: 0 to 863.5
(0.5 pixel steps)
Frame Sync/
HTiming control (pixels)
HTiming
Main video vertical timing adjustment
0
525: 0 to 524 lines
625: 0 to 624 lines
(1 line steps)
Frame Sync/
VTiming control (Lines)
VTiming
