GRASS VALLEY KAM-DEC-4ADC-MUX, Instruction Manual

Page: 11 / 82

KAM-DEC-4ADC-MUX Instruction Manual 11
Installation
Installing the Front and Rear Modules
To install a KAM-DEC-4ADC-MUX module set in the 2000 Series frame:
1.
Locate a vacant slot in the rear of the 3 RU frame ( Figure 3 ) or the 1 RU
frame ( Figure 3 ).
Figure 2. 2000T3NG Frame, Rear View
Figure 3. 2000T1DNG Frame, Rear View
2. Insert the rear module as shown in Figure 4 on page 12 .
3.
Verify that the module connector seats properly against the midplane.
4. Using a crossblade screwdriver, tighten the two screw locks to secure
the module in the frame.
Media section
rear slots 1-6
(with three 2000EMI blanks)
Media section
rear slots 7-12
Network
and reference
input connections
Power, frame
configuration,
& frame health
connections
8173-27r1
8173_28
Media section
rear slots 1-2
(with one 2000EMI blank)
J101
1
2
3
4
J102
Media section
rear slots 3-4
Network
and reference
input connections
Power connections