GRASS VALLEY KAM-DEC-4ADC-MUX, Instruction Manual

Page: 10 / 82

10 KAM-DEC-4ADC-MUX Instruction Manual
Installation
Module Placement in the 2000T3NG Kameleon Frame
There are twelve slot locations in both the front and rear of a 3 RU frame
and four slot locations in a 1 RU frame to accommodate 2000 and Kameleon
Series media modules (audio/video signal handling modules).
The Kameleon media modules consist of a two-module set with a pro-
cessing module and a passive rear module that can be plugged into any of
the frame slot pairs. The rear modules provide the input and output inter-
face connectors.
Kameleon Audio Submodule
The KAM-DEC-4ADC-MUX module requires a KAM-ADC-S submodule
installed in the Submodule 1 position. The submodule will be provided
with the front processing media module. The Submodule 2 position is not
supported in this application.
If the submodule needs to be installed, line up the connectors on the bottom
of the submodule with the correct submodule position on the top of the
media module circuit board (
Figure 1 ). Press firmly to seat the submodule.
After power-up, installation status of the submodule will be reported on
the Status web page as described in
Status Web Page
on page 27 .
Figure 1. Kameleon Submodule Installation
8343_11
Submodule 1
Submodule 2
KAM-ADC-S submodule