GRASS VALLEY K2 SAN, Installation And Service Manual

Page: 38 / 346

Comment Instructions Task
Do not proceed until the
system description accurately
represents all aspects of the
actual system. Refer to
SiteConfig Help Topics . Use
procedures as appropriate for
your site. Modifying K2 client
unassigned (unmanaged)
interface
on page 80,
Modifying K2 Media Server
unassigned (unmanaged)
interface
on page 82
Verify/modify device
interfaces
— Discovering devices with
SiteConfig
on page 85
Discover devices
— Assigning discovered devices
on page 86
Assign placeholder devices to
discovered devices
— Modifying K2 client managed
network interfaces
on page
87, Modifying K2 Media
Server managed network
interfaces
on page 91
Configure IP settings of
network interfaces on
discovered devices
— Making the host name the
same as the device name
on
page 96
Configure names
— Pinging devices from the PC
that hosts SiteConfig
on page
97
Validate networks
— Generating host tables using
SiteConfig
on page 98
Distribute host table
information
Next: Software update checklist
Software update checklist
Comment Instructions Task
— Configuring deployment
groups
on page 101
Create deployment groups
— Adding a software package to
a deployment group
on page
102
Place software on control
point PC
— Checking all currently
installed software on devices
on page 103
Check software on devices
Refer to
K2 Release Notes
.
About deploying software for
the K2 SAN
on page 103
Upgrade/install software to
devices from control point PC
Next: SAN configuration checklist
38 K2 SAN Installation and Service Manual 2014 01 27
Preparing for installation