GRASS VALLEY JUPITER CONTROL PANEL L32 -, Instruction Manual

Page: 45 / 216

JUPITER L-S and LCD Series Control Panel Instruction Manual 45
Button Labels
LD16 Panels
The LD16 includes a button cluster on the right side of the panel that can be
used for category/number selection. The default is shown in
Figure 15.
Figure 15. LD16 with Type ESL Category Set
It is also possible to configure the panel with a custom category set. See Cat-
egory Button Configuration on page 46 for more information.
S25/S50
The S25 and S50 panels have 25 or 50 buttons on the left side of the panel
that can be used for “Button-per-Source” operation. Using the label sheet,
these buttons can be labeled 1 through25 (or 50 respectively). If the button
assignments are more or less permanent, it might be desirable to label them
more specifically. See
Source Button Configuration on page 46 for more infor-
mation.
Figure 16. S25
These panels also include a cluster of eight buttons on the right side that
can be configured and labeled to select router levels. See
CP Level Set on
page 62 for more information.
SXY Panels
The SXY panels include a cluster of buttons on the left side that can be con-
figured and labeled to select router levels. See
CP Level Set on page 62 for
more information.
Figure 17. SXY Control Panel Showing Level Buttons
Override
Source
Level
Clear
Protect/
Lock
1 2 3 4 5
6 7 8
9 10