GRASS VALLEY JUPITER CONTROL PANEL L32 -, Instruction Manual

Page: 195 / 216

JUPITER L-S and LCD Series Control Panel Instruction Manual 195
Configuration Instructions
GPI/O Pin Mapping
The tables and figures in this section will help you when configuring the
GPI/O to know the GPI and GPO locations. The GPI/O panel has one GPO
and six GPI connectors (
Figure 110 ). The actual pin placement and location
are described below in Table 9 and Table 10 .
Figure 110. The GPI/O Connection Location
Use Figure 111 as a reference for the pin location for both the GPI and GPO
tables.
Figure 111. The GPI/O Connection Location
GPO
The following information is about the GPO. The schematic is shown in
Figure 112 . Table 9 shows the GPO’s pin mapping.
Figure 112. GPO Schematic
071853600
GPI
O
P
l
Pi n
1
Pi n
5
Pi n
9
Pi n
6
071853600-GPI/O Pins
Optoelectronic Relay
To external device
From Internal
Control
Pin
2
Pin
3
180