GRASS VALLEY IQUCP25, User Manual

Page: 227 / 338

227
UCP - 3901
User Manual
Logging - Network - 1G
The
Logging Network
page shows MANAGEMENT network message types: Log field
names and current log values are listed in the Log Field and Log Value columns respectively.
Information on several parameters can be made available to a logging device connected to
the RollCall network. For the UCP-3901, logging must be configured and enabled; see
Logging - Configuration (UCP - 3901 Only) on page 216. This page does not apply to the
IQUCP25 card as this port is unused with this model.
Figure 7 - 22:
Logging - Network Page
The logging page comprises three columns:
Enable check boxes to activate log fields as required.
Logging Page
Column Description
Log Enable Select the check boxes that correspond to the parameters for which
log information should be collected.
Log Field Displays the name of the logging field.
Log Value Displays the current log value.
Parameter Description
LAN_PORT_3_NAME= Logs the Ethernet port name.
LAN_PORT _ 3 _ SPEED= Logs the Ethernet connection speed. Valid values
are:
10 Mbit/s Full Duplex
10 Mbit/s Half Duplex
100 Mbit/s Full Duplex
100 Mbit/s Half Duplex
1 Gbit/s Full Duplex
No Link