Run AuroraStream.exe, verify that the bandwidth setting is
correct, and re-run the Self-Test.
Workaround:
Bin behavior
Switching to 16:9 thumbnails during a record will result in a
thumbnail that says
“
Media Not Available
”
for the currently
recording clip.
Description:
CR69438
Record the clips
fi
rst and then switch to 16:9 thumbnails if
that aspect ratio is desired.
Workaround:
When you rename a clip in Aurora Edit, the corresponding
logical asset does not rename so that it appears when you
browse for it.
Description:
CR91413
Media management should be done using MediaFrame.
Workaround:
Breakout Box (BOB)
A reboot is required after the upgrade of AJA drivers used for
the Breakout Box option.
Description:
CR109304
Refer to the Aurora Edit and Aurora Edit LD Installation and
Con
fi
guration Guide.
Workaround:
Going from the HDMI audio output of the AJA Breakout Box
into the HDMI audio input of another Breakout Box is not
supported.
Description:
CR108752
None, not supported by outside manufacturer.
Workaround:
Caching
Caching has been disabled in version 7.0.
Description:
CR109539
Caching is disabled in the registry but not removed from the
Installer. It will still run in the Windows service panel (it won't
be disabled or removed).
Workaround:
Clips
Clip property information is being left behind after large
deletions.
Description:
CR110134
If you delete a large number of clips (eg. 10,000) from a bin
in a single operation, Aurora Edit may be unresponsive for
several minutes while the delete is performed.
Workaround:
DeBug
Using DeBug view may cause application to respond very
slowly.
Description:
CR109093
18 October 2010
Aurora Edit and Edit LD Version 7.1.0 Release Notes and Upgrade Instructions
77
Known Issues
