SiteConfig copies the options you set for the first device and fills in the blanks
on the wizard.
Install and configure software on a NewsShare System
Do not do these tasks if:
•
You do not have any shared storage (NewsShare) Aurora Edit systems. Skip to the
later task to install software on other Aurora Edit devices.
Do these tasks if:
•
You have shared storage (NewsShare) Aurora Edit Workstations.
•
You have one or more Conform Servers.
•
You have SmartBins that require access to the shared storage and the SmartBin
server that is not one of the above device.
You must install and configure software as instructed by the following tasks for these
Aurora Edit device types.
Prerequisites for these tasks are as follows:
•
The devices to which you are deploying software are in a deployment group.
•
Prerequisite files are installed on the control point PC.
•
You have recently done the SiteConfig "Check Software" operation on the devices
to which you are deploying software.
For shared storage Aurora Edit devices, you must use a specific sequence of installation and
configuration tasks. The installation sequence is summarized as follows:
1. Install the software necessary for connection to shared storage on Aurora Edit
devices.
2. Map the storage volume one of the following ways:
•
If NAS storage, mount the NAS volume on Aurora Edit devices.
•
If K2 SAN storage, add all SAN connected devices to the SAN using K2 Config.
3. Install Aurora Suite software.
Use the following tasks to accomplish this sequence.
Install storage software on shared storage devices
1. In the
Software Deployment | Deployment Groups
tree view, select the device or the
group of devices to which you are deploying software.
The corresponding software deployment tasks are displayed in the Tasks list
view.
2. For the software you are installing, select the
Deploy
check box in the row for the
install task.
76
Aurora Edit Installation Guide
4 October 2010
Managing Software