•
The system description contains a group.
1. In the
Network Configuration | Devices
tree view, right-click a group and select
Add
Device
.
The Add Device dialog box opens.
2. Configure settings for the device you are adding as follows:
•
Family – Select
Aurora
.
•
Type – Select the appropriate type of Aurora device.
•
Model – Select the appropriate model.
•
Name – This is the device name, as displayed in the SiteConfig device tree view
and device list view. This name can be different than the host name (network
name). You can accept the default name or enter a name of your choice. Devices
in the tree view are sorted alphabetically.
•
Amount – You can add multiple devices, as currently defined by your settings
in the Add Device dialog box. An enumerator is added to the name to create a
unique name for each device added.
•
Control network – Select the control network.
•
Starting Address – Select from the list of available addresses on the selected
control network. If adding multiple devices, this is the starting address, with
addresses assigned sequentially to each device added.
3. Click
OK
to save settings and close.
4. Repeat these steps for each of your devices.
4 October 2010
Aurora Edit Installation Guide
37
Configuring the network