GRASS VALLEY APEX -, Installation And Service Manual

Page: 65 / 132

APEX — Installation and Service Manual 65
Ordering Information
Ordering Information
Apex router is configured by selecting a frame, Matrix boards, I/O boards
and redundancy and spares where needed. The fan module, one power
supply and a configuration board is included with a chassis.
Control Board
APX-CX-34000
Apex Control XPT board, Crosspoint bus control only. One each CX-34000
must be ordered with all systems, and only 1 is required (regardless of
number of chassis). A second board should be ordered separately if redun-
dancy is required.
Frames, Fans and Power Supplies
When planning or installing Apex frames, consider that each Apex chassis
requires at least one MX-34000A Matrix board. Two MX-34000A boards are
the maximum number for required redundancy. Each chassis also requires
at least one input and one output board.
Note 75 Ohm and 110 Ohm chassis can be mixed in multi-chassis systems. Asym-
metrical sizes are available. For example, 512 x 1024.
APX-FRM-34075
Apex standard chassis, unbalanced (75 Ohm). Expandable to 256 x 256 with
single frame; expandable to 1024 x 1024 with four (total) frames of this type.
Includes 1 PS-34000 Power Supply, 1 FM-34000 Dual Fan Module, and 1
APX-CL-34075 75 Ohm License Board. Accepts up to 8 each input boards
and 8 each output boards. Expansion requires InfiniBand and master clock
cables (see below).
APX-FRM-34110
Apex standard chassis, unbalanced (110 Ohm). Expandable to 256 x 256
with single frame; expandable to 1024 x 1024 with four (total) frames of this
type. Includes 1 PS-34000 Power Supply, 1 FM-34000 Dual Fan Module, and
1 APX-CL-34110 110 Ohm License Board. Accepts up to 8 each input boards
and 8 each output boards. Expansion requires InfiniBand and master clock
cables (see below).
APX-35075-IN
Apex Plus chassis, unbalanced (75 Ohm), input only. Expandable to 2048
inputs with four (total) frames of this type. Must be used with