manualshive.com logo in svg

GRASS VALLEY 8990ARC -, Instruction Manual

Share
Download
GRASS VALLEY 8990ARC - Instruction Manual Download Page 32

32

8990ARC Instruction Manual

Configuration

 

Figure 10.  Newton Configurator Example

Web Browser Interface

The web browser interface provides a graphical representation of module 
configuration and monitoring. 

Use of the web interface offers the following considerations: 

•

Provides complete access to all module status and configuration func-
tions, including naming of input, factory parameter and default recalls, 
slot configuration, and SNMP monitoring controls.

•

Web access will require some normal network time delays for pro-
cessing of information.

•

Configuration parameter changes may require pressing 

Apply

 button or 

Enter

, upload processing time,

 

and a manual screen refresh to become 

effective.

•

Web interface recommended for setting up module signal and slot 
names and reporting status for SNMP and monitoring.

Refer to the Frame Status page shown in 

Figure 11 on page 33

. The 8900 

modules can be addressed by clicking either on a specific module icon in 
the frame status display or on a module name or slot number in the link list 
on the left.

Summary of Contents for 8990ARC -

























































Reviews:

No comments

Brands by name

Popular brands

Load more brands