GRASS VALLEY 8960DEC -, Instruction Manual

Page: 20 / 42

20 8960DEC Instruction Manual
Configuration
The start of active video can be set to the Active Picture lines listed in
Table 6 .
Lock Source (Frame Sync Submodule option must be present to be active)
Second Bank - 2ND LED On
0 Video Input Reference Select Lock Source.
Picture Position Offset
1 Advance Delay Adjust horizontal Picture Position Offset.
H and V Delay Adjustments (Active when Frame Sync Submodule option is present)
2 Advance Delay Adjust Horizontal delay.
3 Advance Delay Adjust Vertical delay.
Freeze Configuration (Frame Sync Submodule option must be present to be active)
4 Manual Auto Set Freeze Recognition type.
5 Off On Perform manual freeze.
6 Frame Field Select Freeze Mode.
7 Field 1 Field 2 Select Freeze Field.
8 Last Field Black Select Freeze Signal.
VBI.Data Line Processing
9 SAV4 SAV3
Select line number of Active Picture Start (SAV). See Table 6 for
the corresponding values for these controls.
A SAV2 SAV1
B – – Not used
C
Notch
Decode
Delete Set type of processing for VBI Data Lines.
D Setup No Setup
Active when Notch Decode is enabled above. Select Yes if setup
is present on data lines.
SuperBlack
E Enable Disable (525 only) Enable or Disable (clip) Super Black.
F – – Not used
Table 6. 8960DEC VBI Settings
Active
Picture Start
525 625
SAV1
21 (Field 1)
284 (Field 2)
24 (Field 1)
337 (Field 2)
SAV2
22 (Field 1)
285 (Field 2)
25 (Field 1)
338 (Field 2)
SAV3
23 (Field 1)
286 (Field 2)
26 (Field 1)
339 (Field 2)
SAV4
24 (Field 1)
287 (Field 2)
27 (Field 1)
340 (Field 2)
Table 5. Decoder Configuration Functions - (continued)
Function
Switch
Paddle
Switch Up
Paddle
Switch Down
Function Description